Model #10A902-2291-B1 Briggs & Stratton engine

  • Air Cleaner
    3 Results
  • Blower Housing/flywheel
    3 Results
  • Carburetor/fuel Tank
    3 Results
  • Crankshaft/crankcase/sump
    3 Results
  • Cylinder/gasket Sets
    3 Results
  • Muffler/guard
    3 Results
  • Rewind Starter
    3 Results

Question and Answers

Q:

Briggs & stratton engine model #10A902 4 hp

A:

Thank you for your question.

I am sorry you are having a problem with the engine. There could be a few things going on. There is a diaphragm and gasket between the carburetor and the fuel tank. Usually that diaphragm is the problem. When you push the primer the flappers on the diaphragm close and force the fuel into the carburetor. If they are not closing because they are dry, it will not prime. I recommend replacing the diaphragm first. To do that you will need to remove the fuel tank and the carburetor. Then remove the screws securing the carburetor to the tank. Once removed scrape the surfaces clean and inspect the tube that goes into the tank. If you see any cracks or holes in the tube, the carburetor has to be replaced.

I have looked up the kit and it is part number 795083 and can be ordered from our parts website: Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Please let me know if you need further assistance with the engine.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 15, 2011
Q:

How much will it cost me to have a new engine installed in my Tractor (20 H.P.) ?

A:

Thank you for your question.

I am sorry you are having a problem with the tractor. I have looked up the model number you have submitted. The replacement engine for the tractor is part number 331877-3036-G5 and can be ordered from our parts website. 331877-3036-G5. The cost of the engine is $ 768.15. I am sorry I cannot give you the cost for labor because the technician would have to give an estimate on that. You can call 1-800-469-4663 to schedule service.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 22, 2011
Q:

YTS3000 Craftsman model 917.289213 valve gap setting 331877-1371-B1 Briggs&stratton Engine

A:

Thank you for your question.  I am sorry you are having problems with your Craftsman tractor model 917.289213. I posted an image below that shows how to adjust the rockers. Click on the image to enlarge it. The rockers should be set to between 0.003 – 0.005.    If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a  Sears technician.  Here is a link for the website:  Sears Home Services . Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
May 20, 2013