Model #1068282380 KENMORE Upright Freezer

  • Door Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Shelf Parts
    3 Results
  • Unit Parts
    3 Results
  • Liner Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Replacement for start relay and overload 1068282380 Kenmore Upright freezer


Hello Paul. The parts diagram for that freezer lists parts for the original compressor and a service (replacement) compressor. If the original compressor has been replaced with a service compressor in that freezer, then you will need the overload that is part number 819100. That part is only the overload and does not include the start relay. The start relay for the replacement compressor is part 1100806 but that start relay for the service compressor does not appear to be available.
If the original compressor is still installed in that freezer, then the start relay and overload do not appear to be available for that original compressor. You would have to have a service technician install a service compressor (part W10439638) to fix the freezer. The service technician must install a new compressor since the repair involves the recovery and recharge of refrigerant.

NOTE: It is likely more economical to replace the freezer than to repair it if you cannot find the start relay and overload that fits the compressor in the freezer.
I hope that this information helps. If you need further assistance, let us know.
Thanks for choosing Sears PartsSelect.

Read More
Lyle W -
Sears Technician
May 06, 2014

Top Parts