Model #10674252400 KENMORE top-mount refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Water Dispenser Parts, Optional Parts
    3 Results


Error Codes

Error Code:



Question and Answers


ice maker not making ice


Check that wire shut-off arm to make sure it is in the "down" position. If it is even slightly raised, the ice maker will not cycle.

Check the water fill tube to make sure that it is not frozen. You can remove the ice maker from the side wall of the freezer to check that issue. It is secured by screws. Unplug the refrigerator before removing that ice maker from the wall.

Make sure that the wire harness is plugged in securely. You may need to remove the ice maker from the freezer wall to check that issue as well.

If you find no problems with those issues, check to see if there is ice in the ice mold of the ice maker assembly. If it is dry, I recommend that you manually fill the ice maker with water using a squirt bottle or turkey baster. See if the ice freezes and is ejected. If the ice maker cycles but does not refill with water, then you may have a bad water valve, a wiring failure or a bad ice maker module. I provided some technical information for this type of ice maker system in the images below. You can unplug the refrigerator and check the resistance through the water fill valve circuit using the information in the first image. If that circuit is okay and the fill valve buzzes when the ice maker cycles but no water enters the ice maker, then the fill valve assembly (part 2188808) will need to be replaced. You can order that part from the Sears Home Services website.

Be sure that you unplug the refrigerator before accessing and replacing internal components.

If resistance through that water valve is okay but the ice maker module is not sending voltage to the water valve in the fill portion of the harvest cycle, then you will need to replace that ice maker assembly (part 4317943). You can manually cycle the ice maker using the procedure shown in the second image.

If the ice maker cycles and fills properly when it is manually activated using that insulated jumper wire in the T and H contacts but does not continue to cycle normally, then the ice maker module will need to be replaced.

These tips should help you diagnose and repair this ice maker failure. NOTE: Do not conduct any of the technical tests shown below unless you are completely confident that you safely execute them .

If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 25, 2011

Top Parts