Model #10659592992 Kenmore side-by-side refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Fridge Starter Device

A:

Thank you for your question.

I am sorry you are having a problem with the refrigerator. The white part is the overload and the brown is the relay. First, remove the old start device. Then install the new overload on to the bottom compressor terminal. Next, slide on the relay on to the two remaining terminals. Connect the red wire to the overload. Then connect the white wire to the number one terminal on the relay. If you model has a capacitor connect the wires to the two remaining terminals on the relay.

I hope this is helpful. If you need further assistance, please let me know.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 10, 2011
A:

I am not sure where the black wire is coming from. The wiring diagram does not show a black wire. I recommend following that wire to find where it comes from. Once you find where is connects let me know and I will let you know where it should be connected. As for the other white and blue wires, they for the capacitor. Connect the white wire on the same side of the relay as the other white wire. Then connect the blue wire to the side with one terminal. I have posted an image below of the wires going to the compressor. Please let me know if you need further assistance.

Read More
Mark T -
Sears Technician
July 12, 2011
See more answers