Model #10657036601 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


The ice flap is not closing after dispensing on my Kenmore side x side model 10657036601.


Look along the bottom of the front trim of the dispenser. Insert a flat blade screwdriver into the 2 notches you will see on the trim and pry the trim loose. Lift the trim up and it will come off. You can let it hang by the wire.

Remove the screws holding the control bracket to the door and gently pull the bracket forward. There should be enough slack in the wires to let you see the flapper door and other parts.

Go to and select parts and you can see a parts diagram of your refrigerator. Enter the model number and select dispenser front from the list of pages it offers. Compare what you have on your refrigerator to the drawing and you should discover what has broken.

Read More
Jimmy K -
Sears Technician
September 16, 2008

Top Parts