Model #10654539400 Kenmore side-by-side refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ice maker not working

A:

Check to see if the ice maker mold has ice cubes in it. If it does then the water system is probably okay. You can use the information shown in the image below to initiate a harvest cycle in this type of ice maker. If the ice maker cycles and refills but does not continue to cycle, then you will need to replace that ice maker module (part 4317943). You can order that part from the Sears PartsDirect website. Be sure that you unplug the refrigerator before accessing internal components and replacing that ice maker. NOTE: If you are not completely confident that you can safely use an insulated jumper wire to initiate that harvest cycle in the ice maker, I recommend that you have a service technician diagnose and repair this ice maker problem . Here is a link for the Sears Service website in case you need it: Sears Home Services .

If the ice maker won't cycle when use the above procedure, you could have a wiring problem. Make sure that the harness is plugged in properly. A blown thermal fuse in the ice maker could also prevent it from cycling.

If the ice mold is empty, I recommend that you fill it manually with a turkey baster or squirt bottle. See if the ice maker cycles and ejects that ice properly. If the ice maker ejects the cubes but does not fill back up, then you could have a problem with the water tube, the water valve assembly, the ice maker module or the wiring between those components.

These tips may help you determine the cause of your ice maker failure. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
July 07, 2011