Model #10653582300 Kenmore side-by-side refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Parts Not Illustrated
    3 Results


Error Codes

Error Code:



Question and Answers


My Kenmore fridge model #10653582300 comes on, but wont get cold?


Your details seem to indicate that the compressor is running but the refrigerator and freezer will not cool. If the compressor is running but you are not getting any cooling at all in the freezer (you see no frost on the inside back wall of the freezer at the bottom), then you apparently have a sealed system problem that will need to be diagnosed and repaired by a service technician. You could have a bad compressor, a lack of refrigerant (Freon) or a restriction in the system that is causing this problem. Here is a link for the Sears Service website: Sears Home Services .

If the compressor is not running and you just hear the fans running, you could have a problem with the start device on the compressor. If you suspect that you have this type of problem, you can try replacing the start device on the compressor (part 8201786). You can order that part from the Sears PartsDirect website. That component costs around $60. Be sure that you unplug the refrigerator before accessing internal components.

Replacing that part yourself is a risk. There is no guarantee that replacing the start device will fix your problem. You could have a bad compressor or a number of other problems. It may be worth the risk considering the cost of a service technician call.

I hope that this information helps. If you need additional assistance, reply with more details such as whether the compressor is running, what fans are running, etc.

Read More
Lyle W -
Sears Technician
March 23, 2011