Model #10653502300 KENMORE side-by-side refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Inlet valve wiring and tubing hookup

A:

I provided the wiring diagram and a wiring schematic in the images below that should help you properly wire that inlet water valve. The solenoids have two spades. It does not really matter which side of the solenoid has the neutral connection. If the wire harness plugs fit the spades on the solenoids either way, then you can connect them in either direction. The inlet water supply for the refrigerator will connect to the inlet of the isolation valve. You should have a tube that runs from the isolation valve to the water filter. The return line from the water filter will connect to the inlet of the dual valves for the ice maker and water dispenser. The outlet for the water dispenser connects to the reservoir and then the dispenser. The outlet for the ice maker goes up the back of the refrigerator to that component.

I hope that this information helps. If you need more assistance, reply with additional details.

If you get to a point where you are not sure how to install that valve assembly, you can have it replaced by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 29, 2011

Top Parts