Model #106175781 Craftsman air compressor

  • Unit
    3 Results

Question and Answers

Q:

Replacing preshure switch

A:

Thank you for your question.

I will be happy to help you. The new pressure switch should have a diagram on the under side of the cover. If it does not have a diagram, the terminals on the switch should be labeled. Two terminals should be marked line and the other two should be marked load. Connect the black wire from the cord to one terminal marked line and the white from the cord to other terminal marked line. The two remaining terminals should be marked load. Connect one wire from the motor to one of the load terminals and the other wire to the other load terminal. Then connect the ground screw to the ground screw

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 25, 2011
Q:

ihave a older craftman air compressor model 106-175781 i in the process of putting a connecting rod in do you know the torque spec for the rod cap an head bolts

A:

The torque specification for the bearing cap bolts is 50 - 120 in.-lbs. The head bolts are tightened in a crossing pattern to 225 - 300 in. lbs.

Read More
Lyle W -
Sears Technician
April 29, 2010