Model #0105 Power Wheels toy riding

  • Replacement Parts
    3 Results

Question and Answers

Q:

replaced control board WH12X10355 on model WBVH6240F0WW need id number to program, manual says 01-03, board allows 01-05

A:

Thank you for your question and I understand your concern.

Anytime you replace the Machine Control Board you must select the model number so the control knows what model it is supposed to be. Your specific model code is three (3).

To program the replacement control board:

  1. Reconnect power to the washer. (The display will now show "---", which means no model has been selected.)
  2. Rotate the cycle knob until the correct model number is displayed:
  3. Select 3 for model WBVH6240
  4. Press and hold the Start key for 3 seconds (or until a second beep is sounded).
  5. Press the Power key to reset the control.

NOTE: If an error is made in programming the control, enter test mode and select t01. Then repeat steps 2 thru 4.

Read More
Joey S -
Sears Technician
February 24, 2011