Water Softener: No display
Lack of electrical power, a failed power transformer or a faulty timer can prevent the water softener display from lighting up.
Check the electrical outlet by unplugging the water softener and plugging a small lamp or appliance into the outlet to check for power. Reset the house circuit breaker for the outlet if the outlet is dead.
If the electrical outlet is okay, check the transformer wiring connections to the timer (with the transformer unplugged from the electrical outlet). Reconnect any loose wires. If the transformer wiring connections are okay, check the transformer's wires for damage and replace the transformer if you find wiring damage.
If the electrical outlet and transformer are both okay, then you'll likely need to replace the water softener timer because it's not lighting up the display.
Replace the water softener timer
The timer is an electronic control board that lets you program the water softener. The timer also controls the functions such as water softening and flushing the resin filter. Replace the timer if it fails to control the water softener's functions.
The valve motor rotates the valve rotor to operate the water softener. If the valve motor fails, follow these steps to replace the valve motor.
The timer is the control board you use to program the water softener. If the timer isn’t accepting commands when you push the buttons or if the display won’t power up, replace the timer.
Learn how to decipher symbols so you can buy the right part for your problem.
Learn how to use a multimeter to check for wiring problems in an appliance that's not working