How to Repair a Riding Lawn Mower Tire Video


If there is a small object embedded in the tread of a tire on your riding lawn mower, you can often repair it with tire sealant. This video shows which types of damage a sealant will fix, along with walking you through how to fix the flat tire.

For additional repair help, including common symptoms and troubleshooting tips, step-by-step riding lawn mower and tractor repair guides, and articles, check out our repair help section. In addition, find the riding mower parts you need to fix your mower.

How to Fix a Flat Tire on a Riding Lawn Mower

Supplies or Parts You Might Need

When there’s a hole or impaled object in the tread of a tire, you can often fix the tire with tire sealant. We'll show you how to use tire sealant to fix a flat so you can get back to mowing.


Find the Leak

You know where the tire leak is if you see a nail, screw or other object stuck in the tire. Don't pull the object out before inserting the tire sealant. Otherwise, the sealant may not seal the hole.

If you don't know where the leak is, put air in the tire and spray soapy water on the tire. The leaking air makes bubbles in the soapy solution.

If you find the leak in the tread area, you can use the sealant to fix the leak.

You can’t use sealant to fix holes in the tire sidewall. Replace the tire if you find the leak in the sidewall.

Put in the Sealant

Now, let's put in the sealant. Wear work gloves and eye protection when repairing your tire.

  1. Check the chart on the sealant bottle to determine how much sealant to use for the size of tire you're fixing. This tire needs 16 ounces of sealant.
  2. Rotate the wheel so the valve stem is in the 5 o-clock position.
  3.  Remove the cap and valve stem core from the tire.
  4. Open the sealant bottle and connect the hose that comes with the sealant to the bottle tip.
  5. Connect the other end of the hose to the tire's valve stem.
  6. Squeeze the bottle and inject the right amount of sealant into the tire.
  7. Disconnect the hose from the valve stem and wipe off any sealant residue.
  8. Reinstall the valve stem core.
  9. Fill the tire with air to the recommended pressure and reinstall the valve cap.

If an object is stuck in the tire, pull the object out now.

Drive the mower for 3 to 5 minutes to evenly distribute the sealant inside the tire.

If the sealant doesn't fix the leak, or the hole is in the tire's sidewall, replace the tire as shown in one of these videos.

On some tires, you can install an inner tube instead of replacing the tire.

That's it. Once you fix the tire, you can get back to mowing.

I hope this video helps you out today. Check our other videos on the Sears PartsDirect YouTube channel and subscribe to find out when we post new videos.

Riding Lawn Mower Accessories

Part #:
Earn points
Part #:
Earn points
Part #:
Earn points
Part #:
Earn points