Water Softener: Leaks water

Check the valve body and bypass valve assembly for cracks. Replace any damaged components. Tighten the water line connections if loose. Replace the O-rings on the water line connections if the O-rings are worn or damaged.

These repairs may help solve your Water Softener problem:

Clean the water softener venturi

Venturi

The venturi draws brine water into the resin tank to regenerate the resin filter. A dirty venturi won’t draw brine water into the resin tank. Clean the venturi periodically to maintain steady brine flow into the resin tank for regenerating the resin filter.

For manuals, repair guides, and specific part recommendations, enter your model number.

Replace the water softener venturi

Venturi

The venturi creates a vacuum that draws brine water from the salt tank into the resin tank for regenerating the resin filter. A damaged venturi won’t draw brine into the resin tank. Replace the venturi if it’s damaged.

For manuals, repair guides, and specific part recommendations, enter your model number.

Replace the water softener rotor valve seal

Rotor valve seal

The rotor valve seal on the bottom of the rotor valve prevents water from leaking out of the valve and allows water to flow through the proper opening at the bottom of the rotor valve.

For manuals, repair guides, and specific part recommendations, enter your model number.

Not the symptom or solution you were looking for? Check out these other solutions