CONFIRM THE PART FITS
Lawn Tractor Blade Drive Belt, 1/2 x 103-1/16-in 954-04219
Part #954-04219
Part Information
This blade drive belt (part number 490-501-M009) is for lawn tractors.
Blade drive belt 490-501-M009 turns the pulley that spins the blades on the mower deck.
Wear work gloves to protect your hands when installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #13AX90YT001 MTD front-engine lawn tractor | 13AX90YT001 | 46" deck (electric pto) |
Model #13AX91AT056 Cub Cadet front-engine lawn tractor | 13AX91AT056 | 46" mower deck (ltx1045) |
Model #13AP91AP056 Cub Cadet front-engine lawn tractor | 13AP91AP056 | 46" mower deck (ltx1045) |
Model #13WX91AT056 Cub Cadet front-engine lawn tractor | 13WX91AT056 | 46" deck |
Model #13AR91PT299 MTD front-engine lawn tractor | 13AR91PT299 | Deck |
Model #13WG91AT056 Cub Cadet front-engine lawn tractor | 13WG91AT056 | 46" deck |
Model #13AR91PT099 MTD front-engine lawn tractor | 13AR91PT099 | Deck |
Model #247289060 Craftsman front-engine lawn tractor | 247289060 | 46" deck (electric pto) |
Model #13RX91AT056 Cub Cadet front-engine lawn tractor | 13RX91AT056 | 46" mower deck (ltx1045) |
Model #13RP91AP056 Cub Cadet front-engine lawn tractor | 13RP91AP056 | 46" mower deck (ltx1045) |
Reviews
Fast delivery
Good 👍
Ed, Statesboro, GA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Cuts Grass
Fairly straight forward replacement. Able to change it out withoug taking the deck off. Only difficulty is loosening two pulleys. Its a bit of a tight fit to place the 9/16 box end on the bolt side and make sure you have a long socket to loosen the nut just enough to slide the belt out between the guard and pulley
Bill, Leslie, MI
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
always appreciate the simplicity of Craftsman !
Had to replace idler pulley and bracket , along with drive belt , Done under hour /half ,including re-install mower deck .
mharv1, C-Bus OHIO
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replaced a stretched out original
No prob install. Second service to replace bearings,blades. Two rocky country yards.
4wheeler, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Disintegrated in 2 minutes of use.
Disintegrated in 2 minutes of use. I put my old belt on and other than slipping it's still working fine
Bob L, Dade City Florida
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
EASY TO INSTALL AND TOOK ABOUT AN HOUR (I'M SLOW)
REPLACED BLADE BELT. TOOK ABOUT AN HOUR. NO PARTICULAR PROBLEMS
EUAL, BURNEYILLE, OK
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Lawn Tractor Blade Drive Belt, 1/2 x 103-1/16 in
Arrived on time, good quality, quick to install. Thanks!
John, Alvarado, TX
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy install
Learned as i went..only took half an hour to change
Jeff, Mich
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend