Proform Lifestyler expanse 550model #831297153
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
Just ordered part number 109382 for my lifestyler expanse 550 treadmill. I am not sure how to install it.
Looking for how to install a new circuit breaker on the lifestyler treadmill mentioned above. the Model number is 831.297153.
Posted January 31, 2013
Henry, January 31, 2013
good afternoon... i can fully understand your concern regarding this issue. i did locate a link that will discuss this situation in greater detail. though this link discusses a different model number, the mechanics are likely going to be very similar. keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. i hope this link will help guide you to replacing that breaker and have a good day.
Jonathan B, January 31, 2013
thanks for contacting managemylife.com. i see henry provided you a great link with information above. here is the information you need for replacing part 109382. unplug the machine from the wall and remove the motor hood that covers the motor and electronics at the front of the machine. when you have the hood (cover) off, you should see the back side of the breaker where it goes through the housing. take the wires off of the breaker and it should pop out of the housing. put the new one in and plug the wires back up. then put the cover back on and it should be ready to run again.
if you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a sears technician. you may visit searshomeservices.com , follow the instructions and click on the red next button to set service.
please feel free to let me know if you need further assistance.
thank you for using managemylife.com.
Have a repair or installation question about this model?