Western Auto Tillermodel #3355A79
Questions & Answers about this model powered by
Belt for Wizard Rear Tine Tiller
I need a belt for a Wizard Rear Tine Tiller SN 291747. I think the Model is 3355A79. Is this belt available? What is the length of it ? Harold
Posted June 12, 2011
Jackie S, June 12, 2011
the sears parts direct website is helpful when purchasing parts and taking a looking at your diagram. below i attached a link to the website, so you could purchased the desired part. i hope this helps!
XX Wade_, June 14, 2011
i show the forward drive (inside) belt with part number 133035. the belt size shows to be 1/2 x 41 inches.
the reverse belt (outside) is part number 2614j. the belt size is 3/8 x 44.
you may order those here if you'd like.
thank you for using manage my life!
Glenn, March 22, 2012
my rototiller is an old tiller i need a diagram to install a belt which is located on the back of the tiller it is a wizard front driven model# g1s 6990a17 the belt size is 3l510 3/8 by 51.
XX Wade_, March 26, 2012
@glenn, i have no information on that model number at all. i'll keep looking and see if i can come up with anything. the belt number is a standard belt that's used on a number of products but i'm going to see if i can come up with anything searching that number as well.