Shop Vac Shop vacmodel #400
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
Kenmore stove alarm code F10
Kenmore stove model 790.9411-4407 Often will get an alarm code F10, seems to happen at settings above 400 degrees. Turing off the stove and resetting the temperature after several attempts will eventually cause the oven to bake properly, the oven temperature seems to be a little low, may be 25 to 40 degrees. Initially the temperature probe resistance looked to be as per the RTD scale about 1100 ohms at room temperature, now I do not seem to be able to get a resistance reading, yet the stove still seems to work after a number of resets. Is the issue the temperature probe or the electronic control?
Posted October 03, 2012
Yadira B, October 03, 2012
Range error codes can be confusing & frustrating. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.
AnneJ, October 03, 2012
I can understand how frustrating it is to have issues with your range. It sounds like the problem that you are having is with the temperature probe. The probe should be giving you resistance at all times. If it fails, then the control reads that the temperature has run away. This is why you are getting the F10 error code. I would suggest that you replace this, and then recalibrate the temperature in the oven. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.
Daniel, October 03, 2012
Ofter the temperature probe is replaced how is the oven temperature recalabrated? Thanks for the help.
Have a repair or installation question about this model?