Mtd Lawn mowermodel #260
Questions & Answers about this model powered by
my poulan pro 260 chain saw wont stay running
my chain saw starts for a couple seconds then staws wont start up for a while the starts agian for a couple seconds and repeat
Posted October 02, 2012
Yadira B, October 02, 2012
i understand the concern with the chain saw not running properly. i would suggest that you provide a little more information such as the model number of your product so your expert will be able to provide you the best possible answer. just click on reply below where you can provide the additional information.
Mark T , October 03, 2012
thank you for your question.
i am sorry you are having a problem with the blower. if the fuel mixture in the chainsawis older than 5 weeks old, it should be drained. then refill with fresh fuel mix. if this does not help i suspect there is a problem with the fuel system. i recommend checking in the fuel tank first. when you look in the tank, you should see a fuel line with a white filter attached to the end. then inspect the fuel line. if it is hard and brittle, it has to be replaced. here is a video that shows how to replace the fuel line. if the fuel line is fine, i suspect the carburetor is to blame. the carburetor will have to be cleaned or replaced. here is a video that show how to clean the carburetor. before you remove the carburetor, make sure to note the fuel line and cable connections. this will save a lot of frustration later. the parts for the chainsaw can be ordered from the following link. parts for craftsman blower
i hope this helpful. if you need further assistance, please reply below with more details.
if you do not feel confident repairing this problem yourself, then you can have it repaired by a sears technician. here is a link that will provide the nearest drop-off locations: sears home services .
thank you for using manage my life.