Maytag laundrymodel #MDE6700AYW
Questions & Answers about this model powered by
my Maytag Neptune dryer flashes
my Maytag (MDE 6700AYW )control panel was flashing and making some beeping , now the dryer starts and turns off in 15 seconds. I did the service mode to get a code by 1. Enter to Service Mode by press CHIME and TEMPERATURE keys for 3 seconds or until 3 beeps are heard. 2. Access Diagnostic Codes by pressing WRINKLE PREVENT. A d will be displayed. Rotate the CYCLE SELECTOR KNOB in either direction to read it. 3. Press SENSOR DRY and TIME keys for 3 seconds to clear it. 4. Power OFF to exit Service Mode 5. Power Check ON I didn't get any code except -- I also unplugged the dryer and still didn't fix Thanks Butch
Posted December 23, 2012
Priscilla V, December 23, 2012
i understand how it can be upsetting with your dryer not working. while you are waiting for your expert answer, i did some research on the unit. i was unable to locate information that would be helpful with regards to your question at this time. your expert will answer within two business days with detailed information. thank you for using manage my life.
Joey S, December 24, 2012
thank you for your question and i understand your concern.
you did not indicate what if any fault codes appeared after entering the service mode. after entering the service mode; press wrinkle prevent key pad at which time it should display "d". once the letter "d" is displayed, rotate the cycle selector knob to sequence through the codes and write them down. i added images below to reference.
if it does not bring up any fault codes, i suspect a faulty user interface or possibly the control. i strongly suggest calling a service technician to properly diagnose and repair your dryer.
if you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a sears technician. here is a link for the website: sears home services .