Lobb Humidifiermodel #WA1
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
GE oven gets F2, F3 and F5 error codes and turns off
GE built in oven JTP15WA1WW stays on for 25-35 min then gives F2, F3 and/or F5 error codes and turns off.
Posted December 29, 2012
Julio, December 29, 2012
It can be very frustrating when your oven malfunctions and displays error codes. I did some research and provided a link to a similar question and answer on our site. I hope this will give you a better idea on the next step to take until the Expert responds to your question in more detail within 24 48 hours.
Barbara H. , December 30, 2012
I know how upsetting seeing multiple errors on a range can be. The link provided by Julio is a similar situation. I checked the technical data for your Ge model. The F2 indicates the oven is over temperature in the cooking or cleaning mode. F3 indicates an open or shorted sensor circuit. F5 indicates the loss of the safety relay circuit. These can be due to a control failure, shorted or corroded wiring or connections and sensor failure. Try pressing Clear/Off to see if errors clear and do not return. If errors return, I highly recommend having a qualified technician make the necessary checks and repairs. You can schedule a Sears technician here; Sears Home Services .
If you prefer to do your own checks and repairs and are comfortable using an ohm meter, please reply and I will provide additional information. However, due to the multiple faults, I do recommend a technician visit. Thank you for using Manage My Life.
Have a repair or installation question about this model?