Keys pro treadmillmodel #850SERIES
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
Craftsmen Pressure Washer series 850 soap pump/valve/container
Craftsman Pressure washer purchased in 2007. I rarely use it, maintain it properly. However, the soap pump is clog, or it has just stop working. Can you help?
Posted October 27, 2010
Dezeray S, October 27, 2010
having problems with your pressure washer can get frustrating especially when you don't know what is wrong with it. a suggestion i have while you are waiting on an expert to answer your question, provide your model number so you can get a better answer from the experts. hope this helps!
VETTUV809, October 28, 2010
model 850 craftsmen briggs and stratton 80 years special edition.
Jimmy K , October 28, 2010
the detergent dispensers on most pressure washers use a nozzle venturi to draw detergent from a container. the pressure washer will only draw detergent on the low pressure setting.
there is a plastic hose leading from the detergent bottle to the pump on the pressure washer. to clean the nozzle venturi remove the plastic hose and remove the fitting the hose was attached to.
under the hose fitting there will be a spring and a small stainless steel ball. clean the spring and ball and the opening in the pump manifold they go in.
this is usually all that is needed to get the pressure washer drawing detergent again.
if you have more questions send a reply. please send the model number of the pressure washer as well. the model number is on a tag on the pressure washer and will look something like 580.767200.
Have a repair or installation question about this model?