Kenmore Elite Dishwashermodel #66517263400
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
How to replace the top rack, part #8539235, in Kenmore dishwasher model #665.17263400,
How do I remove the old rack from the retractable slides and how do I remove all of the hookups for the upper spinning washer.and install them in the new rack?
Posted August 21, 2012
Marc, August 21, 2012
the dishwasher is great for cleaning the dishes and saving time. i found some information for you that i am hoping will be able to help you. i am adding the link below to help you with your question while you wait for your expert response. it may take 24-48 hours. i do hope that everything works out with the dishwasher.
oliver924, August 21, 2012
thanks for the tip. i have the rack out, but am having a devil of a time removing the 2 wheel-parts on either side that fit into the glides. i
AnneJ, August 22, 2012
i know that it can be very frustrating to have issues with your dish rack. in order to replace the old one you must first get it out. to do this slide the upper rack outwards until it stops. look at the front end of each upper rack slide rails. there will be a plastic end cap located at the end of the rail. you will need to remove these before the rack will come out. press in on the front portion of that tab and pull out at the same time. it should just pop out. the wash parts that are above and below the rack are not attached to it, so you will not need to remove them. i hope this helps. if you need further assistance, please reply to this thread. thank you for using manage my life.
Have a repair or installation question about this model?