• Recently Viewed  
  • Cart 

    Your Shopping Cart

    Showing last added item

    Parts Qty

    Total items:

Can't locate your model number? Use our finder

Choose your product type

Common model number plates

View sample model numbers by selecting your product brand


Kenmore Upright vacmodel #11635923500

Add this model to "My Models" for easy access later.

Kenmore Upright vac Model #11635923500 was saved to your profile.

You have reached the maximum number of models that can be added to your list.

Please Sign In or Register to have unlimited usage.

Questions & Answers about this model powered by

Kenmore Direct Drive 116.35923500 Lower Circuit board

Installed on this machine machine was a tilt switch and a lower circuit boar and roller brush motor.. but to make the roller brush turn you must tap it what could be causing this. Circuit board sent to me you had to strip wire to connect did not have the wire connectors some wires were different colors could this be the wrong circuit board?

Posted June 11, 2013


Henry, June 11, 2013

i can understand your interest on how you must tap your roller bar to activate it.  i did locate a link that will discuss a vacuum with a beater bar that is not rotating as well.  click here to view the link.  though this link discusses a different model number,
the mechanics are likely going to be very similar.  keep in mind that an expert will be
responding within the next two business days if not sooner and will likely offer you more information and
instruction.  they will also discuss if you need to consider the circuit board or not.  i hope this is helpful and have a nice day.

Bill__W, June 13, 2013


 thanks for contacting managemylife. i understand how frustrating it is having trouble with your appliance.

as far as the board being the correct one i will need to know the part number of the board you received.  i will need to look up if there are special instructions or other things need to adapt the board to the vac body.  please reply below with that part number.

please feel free to let me know if you need further assistance. we are always here to help.

thank you for using managemylife.com.


Bryan, July 09, 2013

number for pc board is kc85vcjnz000 this is what was installed roller brush still not starting without a push. what should i look at?

Scott D , July 10, 2013

bill is on vacation and i will try to assist you with this problem. the number of the board you received is correct for this unit. if the brush does run when given a push, it would lead to a weak motor. now, if the motor will start running when just tapping it but not pushing it, then it could be a poor connection but it could also be a motor problem. if all the connections check ok, i recommend having a technician check this. you can call 1-800-469-4663 to locate the nearest repair center or to schedule a tech to come out.

Bryan, July 12, 2013

bill pc board correct for kenmore 116.35923500 brush motor still not working without a push. how would i test voltage at brush motor to double check . new brush motor new pc board do i need to look else were.

Bryan, July 12, 2013

with kenmore 116.35923500 volts 168.2 as suction motor ran voltage dropped with no roller brush motor hooked up to wires do you think pcboard is bad?

Scott D , July 24, 2013

when making voltage checks, all components must remain connected to get proper readings.


M-F 6:30 a.m. - 10:00 p.m. CST
Sat 7:00 a.m. - 9:00 p.m. CST
Sun 7:30 a.m. - 9:00 p.m. CST

Thank you! Your model has been added.

Save model in your profile permanently

Don't have a profile? It's fast and easy to create one. Sign up now and you can access your models anytime, anywhere.

Sign In Register

Save to this computer*

This option is valuable if you expect to revisit Sears PartsDirect using this computer and browser in the future.

*Saved models will only persist on this computer and browser. Model retention may be affected by your browser settings.

OK, Continue