Kenmore Electric dryermodel #11082826101
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
Kenmore Elite HE3 dryer noy heating Model 11082826101
My dryer will not heat. The coils are not getting hot at all. I have checked the breaker cleaned the vent system clearing it free of lint. I checked the voltage going to the coils with the dryer running with high heat selected. Voltage was 126 AC at red and black wire. Model # 110.82826101 I cant find any info on web page or any material to download. I am not sure what to check next and would like to know if it cold be the coils or a sensor.
Posted July 23, 2011
Barbara H. , July 23, 2011
The humidity in many places makes a working dryer important. I located a previous expert post that has some advice for this model if you wish to check while waiting for the expert response. I attached below.
Landell , July 25, 2011
Thank you for submitting a question to Manage My Life.
I am sorry you are having problems with your dryer.
You did not tell me where you measured the voltage black to red. I will assume you checked this at the heating element. Getting a reading of line voltage (126 AC) there indicates that either the heating element or the high limit thermostat is open. You should read 0 VAC on a closed circuit. If your meter will read ohms or continuity, take the wires off the heating element and ohm it. You should read approximately 8 to 12 ohms. Then read the thermostat, it should read closed (0 ohms). If your meter does not read continuity you can bypass the thermostat and try running a cycle. To bypass the thermostat, unplug the dryer and tape the 2 wires on the thermostat together. Make sure this will not touch anything. Plug the dryer back in and start a cycle. If the dryer heats you need a new thermostat, if not you need a new heating element. Do not leave the thermostat bypassed, this is for testing only.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services . Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .
I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.
Thanks again for using Manage My Life.
Have a repair or installation question about this model?