Craftsman Trimmermodel #358795150
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
craftsman 17 inch 25cc gas weedwacker
put new igniter moduleon an 25cc 17 inch gas weedwacker and need to know what setting is on module ?
Posted August 09, 2011
Joseph P., August 09, 2011
I know how important it is to properly replace a part on an appliance to assure it will work properly. While you are waiting for your expert answer, I suggest you add to the thread of this question and include the full model number of your appliance so that the expert can provide you with a more detailed answer. I am adding a link in where you can enter your appliance model number and the owners manual will pop up to help you with your question. I hope my link is useful.
Joseph, August 10, 2011
I had looked in the manual and it don't tell me what the setting is for the igniter module but the model is 358795150 and it is an craftsman 17inch weed wacker gas trimmer
XX Wade_, August 10, 2011
I think you mean the air gap from the ignition module to the flywheel. If that's the case you can set the air gap on the coil to around .008-.010 and that should suffice.
If you have any further questions please let me know back on this thread.
Thank you for using Manage My Life!
Have a repair or installation question about this model?