Brother Fax machinemodel #350
Questions & Answers about this model powered by
We have a team of experts and an active community here to answer any questions you have. In addition to help from the community, our experts actively follow up on questions to get you the information you need.
Kenmore Water Softener IntelliSoft 350 Series No Water Indicated On Flow Indicator On LCD display.
I am wondering if anyone knows how to resolve an issue on my water softener? When I look at the LCD display and turn on a water source that is hooked up the the soft water it does not indacate any water is flowing in the LCD display on the softner. I am not sure what to look at or replace in order to have this working again. Also I am not even sure I need this to show water flow. Any help would be appricated. Thanks in advance. Brett Lyon
Posted January 04, 2012
Joseph P., January 04, 2012
it can be inconvenient having troubles with your water softener and i will be happy to help. i did some research for you at managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. the link is attached below. if you do decide to schedule service and have a qualified technician help you, i have also attached a link to searshomeservices.com. i hope these links provided assistance for you.
Brett, January 04, 2012
thanks for your help. i believe the problem is with the water flow sensor. i have taken this out and put a magnet on it and nothing happens. does this mean its the sensor?
XX Wade_, January 05, 2012
yes, the machine needs to register that water is being used. otherwise it will not regenerate when it's time and you will end up with hard water.
on the inlet valve there is a little sensor and inside that pipe there is a little turbine. one or both could have failed. you will need to put the water into bypass via the bypass valve so you can take the intake pipe loose. check the turbine to make sure it's there and able to move. if that looks good then the sensor is the problem. if the turbine is not there or has blades missing from it (it will be obvious) then replace the turbine.
you can go here with the model number to order the needed parts for your softener.
thank you for using manage my life!
Have a repair or installation question about this model?