Model #ZEK737BA1BB GE Built-In Oven, Electric

  • Control Panel
    3 Results
  • Body Parts
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Convection Fan
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Venting problem, GE Monogram ZEK737 ZEK737

A:

After further examination, I do see wiring in the back of the fan, but there are two connections in the front which have no wiring to them. Also the fan is immaculate and brand new in appearance as if it has never been used. This unit is around 20 years old...

Read More
Chris -
January 22, 2015
A:

After further, further examination. The unit is a 736, not 737.

Read More
Chris -
January 22, 2015
A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your oven and I do understand your frustration. Glad to help out. I'm looking at your model number ZEK737 and certain models are equipped with a functioning fan and other models are not. Compare your model ZEK737BA1BB with model ZEK737WP2WG. comes with the parts that are needed to run the fan items 582 and 31. You might need to contact GE for part availability. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 24, 2015
See more answers

Top Parts