Model #X2 SUPERWINCH Winch

  • Unit
    3 Results
Find part by diagram >

Question and Answers


EO35, blown 20A PCB fuse 79099913800 Kenmore Elite Electric range


Thank you for choosing and being a valued member.  I can certainly understand how frustrating it can be when your range is not working properly. 

I do apologize per the technical manual I am not seeing a F35 for a range. I do see error codes for F35 for a washer only.

Replacing the Induction Control Assembly – When
replacing the induction control assembly on the back of
the range, do not over-tighten the 4 screws that secure
the Control Assembly to the range or the screws that
secure the rear wire shield to the Control Assembly.
Over-tightening the screws can damage the plastic
housings holding the circuit boards.

On the wiring diagram I see there are two boards that control the right and left induction cooktops. I recommend having a service technician diagnose the unit because those boards lead to the main control board. 

Here is information to test the board: 

I do show 35 or 75 AC Input voltage too high.
1. Verify chassis ground wire connection to terminal X17 on filter board & to chassis ground.
2. Test for approximately 240 volts AC at filter board terminals X1 - X4 & X2 - X5.
3. If voltage is correct (240 volts AC ± 10%) replace filter board.

You can also visit for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 28, 2015

Intermittent water from fridge. Approx 1-2 cups at a time. 106.4645429800


Thank you for choosing Sears Parts Direct. I will be more than happy to help you with your refrigerator. Upon researching model 106.45429800; I found the model has the 46 removed. The 46 is letting us know it’s in the refrigeration category. It sounds like the filter is backed up. The filter is usually replaced every six months or the filtration capacity has been exceeded. The filter can cause the water to back up and leak. Try changing the filter and see if the issue continues.

Thank you for choosing Sears. We appreciate your business and have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 26, 2015

The filter was recently changed. Still leaks intermittently. Leaked twice after I turned water supply off. Please tell me where I can find information on the defrost process. How does it work? Can I control when it activates? How do I gain access to the path of water exit from the refrigerator?

Read More
Geoffrey -
July 26, 2015
See more answers

What size wheels this model uses in the front? 917378320 Craftsman Rotary mower


Thank you for choosing sears I would be happy to help you with your lawn mower. Upon researching model 917378320;  the front wheel size  is 8x2, I have posted a link of the wheel to view the link click here.

I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
May 12, 2015