Model #WTW6800WW1 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Motor, Basket And Tub Parts
    3 Results
  • Pump Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Part numbers and parts needed WTW6800WW1 Whirlpool Residential washer

A:

Thank you for your inquiry on your Whirlpool Washer, Model: WTW6800WW1. From reviewing the details on your model, it appears that the gear shaft only comes with what is show in the picture below. If the gear shaft assembly is the only thing that needs to be replaced I don’t believe you would need to change the motor. 
http://www.searspartsdirect.com/whirlpool-washer-parts/model-WTW6800WW1/1198/0153200/W0905160/00003.html

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer center to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 14, 2015
Q:

WTW6800WW1 noise during sheets wash cycle WTW6800WW1 Whirlpool Residential washer

A:

Should have also said that the button hitting sounds does not happen on the other cycles. I just washed a load of sheets and started with it on the sheets cycle... made the noise. Cancelled the load with about 35 min left, and re-started the exact same load on regular.... no noise. I have washed other loads on regular, towels, and perm press....without the hitting noise. Only notice it on the sheets cycle.

Read More
Karen -
February 28, 2015
A:

Here is link a repair guide with instructions for removing the spin basket

The tub assembly is supported by 4 suspension rods and springs. There is one in each corner which is supported by the top cabinet frame and connected to the bottom of the tub. Once the main top has been hinged open, you can access the 4 tub support rods for inspection or replacement.

Here is a link showing how to bring up error codes if your washer is stopping and flashing the lid lock light.

Read More
Joey S -
Sears Technician
March 09, 2015
A:

Here is a link a repair guide with instructions for removing the spin basket

The tub assembly is supported by 4 suspension rods and springs. There is one in each corner which is supported by the top cabinet frame and connected to the bottom of the tub. Once the main top has been hinged open, you can access the 4 tub support rods for inspection or replacement.

Here is a link showing how to bring up error codes if your washer is stopping and flashing the lid lock light.

Read More
Joey S -
Sears Technician
March 09, 2015
See more answers
Q:

cabrio washing machine model wtw6800ww1 makes noises during spin cycle like its hitting s screw or something is stuck or like someone else stated a popcorn sou

A:

I understand how it can be frustrating as well a great concern with your Washer not working. I have taken the time to research on the Manage My Life website and have located similar information . While you are waiting for a detailed reply from an expert I have attached the links below. Hope this helps!

Read More
Priscilla V -
February 12, 2012
A:

One thing to try is to remove the basket and check under it for coins and other small objects that might have been left in a pocket. The image below will show how this is done. Remember to unplug the washer first.

Check this first and then we'll discuss other possible causes of this noise problem.

Read More
Fred M -
Sears Technician
February 13, 2012
A:

Hi Fred thank you for the info, although I put in rinse spin cycyle to ck again and I believe it is making noise when it drains the water a cracking/popping type sound which I confussed with it when it spends. Could you plse help me once again! thank you in advance.

Read More
debbie -
February 13, 2012
A:

If the noise is during the pump out then checking the drain pump would be the next step. It is accessed by laying the washer down on it's front. Use a towel so there are no scratches. The image below may help. You might still want to check under the basket first. _Remember to unplug the washer first. _

Read More
Fred M -
Sears Technician
February 15, 2012
A:

Fred - when I click on the images, they open anther window in by browser, but only show a tiny picture (like less than 1" wide and 1 1/2" tall). If I try to print, still that small. If I copy/paste into another program (like word) and make bigger, it is just blurry. Is there a special way to view the images above??? thanks

Read More
Karen -
February 28, 2015
See more answers

Top Parts