Model #WTW5590SQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

clutch assy installation WTW5590SQ0 Whirlpool Residential washer

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to assist you in repairing your clutch assembly. I did look into the model number you have provided and I have found information to assist you. 


  1. Disconnect the power cord from the power source.
  2. Remove the agitator by removing the barrier cap and then the spring retainer using a 1/2 inch drive ratchet extension by placing the male end into the spring retainer (key#23) and screw it off counterclockwise (CCW).
  3. Lift the augur (key#6) off.
  4. Remove the 7/16 inch bolt (key#2) and lift lower agitator (key#7) off.
  5. Remove the left hand (key#14) and right hand (key#11) end cap cover off. See image below.
  6. Remove the screw located at the bottom of the left and right hand end caps.
  7. Slide the console (key#26) towards you and then lift and hinge it over the rear panel.
  8. Pop the two gold colored cabinet retainers off using a screw driver. See image below.
  9. Disconnect the lid switch harness connector and tilt the cabinet towards you and then walk it out of the way. See image below.
  10. Remove the pump and motor. See image below
  11. Remove the three gear case mounting bolts.
  12. Lean the washer back and slide the gear case out from under the washer.
Let me know if this helps. 

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 05, 2014
Q:

Where is the lint filter located on a whirlpool washing machine? The model number is wtw55909osqo

A:

Thanks for posting your questions on ManageMyLife.com

I can understand how important it is to know where the filter is located. The model number you provided did not come up in my system. I'm assuming the correct number is WTW5590SQ0. If this is the correct model number, I'm showing this model does not have a lint filter or lint trap. If this is not the correct model number please check your number again and respond to this conversation below.

Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
August 30, 2013

Top Parts