Model #WTW5100VQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What could cause the hot water not to run in my washing machine? WTW5100VQ0!CW5130524

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer has no hot water.

It sounds to me like the temperature switch has gone out. That would be the second part to replace after replacing the water valve.

8578337  is the water temperature switch. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 07, 2014
Q:

What can be the problem with my washer when it won't agitate or spin. It fills with water but from there it does nothing. It is making a humming noise.

A:

I know that I use my washer almost everyday and I know how fast dirty clothes can gather so its good to have a good working washer. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.

Read More
Joseph P. -
December 01, 2010
A:

Thank you for a good description of the symptoms. From what you described it sounds like something is stuck in the pump or the motor has problems. I recommend checking the pump for a child's sock or something similar. Another possibility is the motor itself or the harness going to the motor.

I am sending you access instructions so you can make some checks.

Remember to disconnect power before attempting access & use extreme caution when working around voltage.

After accessing the motor check the motor harness first. If that is ok then you can check the pump. Be sure to have a pale & towels handy.

Please get back with us after making these initial checks if you run into anything.

Read More
biker dave -
Sears Technician
December 02, 2010
See more answers

Top Parts