Model #WSXH208V1WW GE Residential Washers

  • Control Panel
    3 Results
  • Cabinet, Door & Top
    3 Results
  • Tub & Motor
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replace GE stackable washer

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I have provided a link to an expert answer on replacing an appliance and a link to Sear.com. It is an easy way to find a replacement for your GE Washer. I hope the links help you.

Read More
James -
February 15, 2012
A:

Thanks for contacting ManageMyLife.com. For information on comparing newer washer and dryers to you model I'd suggest contacting Sears.com for assistance. Just go to the Worry Free Shopping tab at the bottom of the page and click on the Shopping Helpers link on Sears.com. From there you can click on the Email, Chat, or Talk links to speak to an agent directly for assistance.

I hope this helps.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
February 16, 2012
See more answers
Q:

Washing Machine not goin into its spin cycle

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
November 26, 2011
A:

Thank you for submitting a question to Manage My Life.

You did not mention whether or not your washer will agitate and drain. You most likely have a bad timer. The diagnosis of this issue will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have an ohm/volt meter and are confident in your technical abilities, please utilize the checks below. These will help you troubleshoot the timer verses motor.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here, and if I may be of further assistance, include more details, in a reply to this post.

Landell

Read More
Landell -
Sears Technician
November 28, 2011
See more answers
Q:

What is wrong when the timer dial is loose and what is wrong when the washer operates with the dial not pushed in?

A:

I may not understand the question correctly because after you turn the timer knob to select a cycle you would pull out on it to start. Your complaint that it starts with the timer dial not pushed in sounds normal. You pull the timer out to start it and push it in to turn it off.

If the washer starts without pulling the timer knob out and the knob is already pulled out that would be normal but if it starts with the dial pushed in then most likely the timer itself is bad. If you can’t push the timer dial in or out and nothing is jamming it then most likely the timer is bad.

If you can't push the timer in or pull it out then most likely the timer is broken.

The cam (part key 24 in the image below) fits around the timer stem and it would move back and forth on the timer stem. As long as the cam turns with the timer stem it is working properly.

The cam lever (part key 23) should fit onto the cam and as the timer and cam turn the lever moves a rod (part key 25) connected to the dispenser. With the top of the washer off you should be able to see this as you turn the timer knob.

If the washer starts no matter if the timer is pushed in or out then most likely the timer is bad and will have to be replaced.

If the problem is the timer turns but the dispenser doesn't then replace the cam and the cam lever.

Submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
September 24, 2009