Model #WSM2700HFWWW GE Laundry Centers/Combos

  • Control Panel
    3 Results
  • Door & Drum Parts
    3 Results
  • Motor, Blower & Belt
    3 Results
  • Cabinet & Top Panel
    3 Results
  • Tub & Motor
    3 Results
  • Transmission Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my G.E. washer starting a new cycle on it's own?

A:

The washer starting on its own sounds like a waste of water and I am sorry for the inconvenience. I did some research and I was able to find a link with a similar question. I am also adding a second link in where you can set service to have your washer repaired by a certified technician. I hope this helps with your washer troubles while you wait for your expert response.

Read More
Joseph P. -
November 28, 2012
A:

Hello Brian,

I'm sorry to hear that your washer is starting on it's own and I would like to assist you. I have one important question, does the timer continue to keep moving through the off position after it has completed a cycle? If this is the case, it is very likely to be a short on the neutral side of the timer motor's wiring harness. I have included the wiring diagram, attached to this reply, for your assistance. Be sure to unplug the washer prior to servicing it! Use a multimeter and test the neutral side of the timer wiring to the chassis of the washer, with the timer in the off position. I suspect that you will see a closed circuit. If that is the case, you will need to follow the wire until you find where it is shorted to the cabinet or within the plug itself.

Please let me know what you find, I am looking forward to assisting you further with this issue.

Jerry C

Read More
Jerry C -
Sears Technician
November 29, 2012
See more answers

Top Parts