Model #WS-48511 MITSUBISHI Projection/Digital 42" and above TV

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Mitsibishi TV repair - Model # WS55711

A:

Managemylife.com is a great place to find the answers to just about anything, especially on Televisions and how to repair them. I would suggest that you contact Sears to see if they will perform that repair with part that is used. I have provided the link to SearsHomeServices to help you see what they may have to say.

Read More
James -
February 24, 2012
A:

James- who are you with. Are you with Managememylife staff.. Just curious. Anyway, I already reached out to Sears as mentioned in my original email and they do not have the part. They said the part is no longer available. I can not use them as a result. Thanks anyway.. I want to order the part I need online, and it will be used as a result. I cant tell if the part I am getting ready to order will work or not. The part #s are off by 2 digits at the end of the part number. I think it will work but dont want to waste 100 dollars if it does not....

Read More
Bill -
February 24, 2012
A:

James- Sears did say they would do the repair work if I could find the part.. I am just trying to get the part right now..

Read More
Bill -
February 24, 2012
A:

The board that you are looking at is not for your model. The model numbers that are on the auction site show that the complete part number is 930B880003.

Read More
Dusty J -
Sears Technician
February 29, 2012
See more answers
Q:

Mitsubishi TV Model WS-48511

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
February 04, 2012
A:

Error Code Operational Check
Note: The TV must be in "Shut Down" and NOT have been switched/ turned Off, to perform the Error Code Operational Check. When the TV is switched Off, the code automatically resets to "12" no error.

Pressing the front panel "DEVICE" and "MENU" buttons at the same time, and holding for 5 seconds, activates the Error Code Mode.
The LED flashes denoting a two digit Error Code, or indicating no problem has occurred since the last initialization.

Note: The front panel buttons must be used, NOT those on the Remote Control.

  • The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
  • The flashing then pauses for approximately 1/2 second.
  • The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
  • The Error Code is repeated a total of 5 times. Example: If the Error Code is "23", the LED will flash two times, pause, and then flash three times.

If you could provide the code i would be able to point you in a direction.

Read More
Dusty J -
Sears Technician
February 06, 2012
See more answers

Top Accessories