Model #WR30X0327 GE Ice Maker Kits

  • Icemaker
    3 Results
Find part by diagram >

Question and Answers

Q:

icemaker will not turn off wr30x0327p

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your icemaker and I do understand your frustration. Glad to help out. I'm looking at your model number wr30x0327p and I was not able to get a match with wr30x0327p but from your description I would suspect a failure with items 18, 29, 30 or 12 one of the micro switches. It is very possible that the entire icemaker will need to be replaced. Here is a link that may help with additional troubleshooting. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 09, 2015
Q:

How do you make icemaker WR0X10093 (Sears recommended replacement) fit in refrigerator model 363.58067891?

A:

I understand the frustration when it comes to working on installing parts on you refrigerator properly. While you are waiting for a detailed reply from an expert and you do decide to have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler. I have provided the link below. Hope this is of help!

Read More
Priscilla V -
June 13, 2012
A:

Dear Stephen,

First of all, I apologize that we weren't able to answer your question last month. We strive to answer all of our questions within two business days. I looked and wasn't able to find your previous question. If you have the URL of that question I can answer it and investigate why you didn't get your answer. In any case, I am happy to help you now.

The icemaker itself is a generic replacement for several models , but I have researched your model, and this part number should definitely fit. I reviewed past service orders where our field technicians have successfully installed this icemaker into your specific model, so I'm pretty sure you have the right part. It just might be tricky getting it to fit. So the fact that the power cord looks different should not be cause for alarm. Also, the longer adapter cord is needed in some models, but maybe not yours. It is just an extension, so try removing the extendable piece, and that may give you the room you need.

Since one picture is worth a thousand words, would you be kind enough to take a picture of your unit, where you are installing the icemaker, and any other detailed pictures that show the obstruction. You can do that by clicking the "Add an image" link in your reply. This is a reasonably hard repair to make, and it's even harder because the new part looks different than the old so you can't just reverse your steps. But we are happy to help you. Please try this suggestion and send me a picture if you are still having problems.

If you choose to get a Sears installer to help you with this, you certainly can schedule service with Sears Home Services . , but if you want to save some money and do it yourself, I will help you.

Read More
Bill__W -
Sears Technician
June 19, 2012
A:

Bill, the icemaker won't fit. I need the extended adapter cord to make the male-female transition but with it in place the icemaker won't fit. The cord gets in the way. I can install it without the adapter cord but when I do the ice bucket with the dispenser auger absolutely can't be put back in place because the new icemaker hangs lower than the original and obstructs the point of entrance. The only solutions possible would be to remove the old power cord from the defective unit and install it on the new and then buy a replacement ice bucket. I'm not confident that replacement would be any better than the replacement for the icemaker. I'll send pictures soon. Steve

Read More
Stephen -
June 19, 2012
See more answers
Q:

refrigerator model TFX22PR GE Profile ice maker

A:

I understand how frustrating as well quite concerning it can be with the noise coming from the ice maker.I have taken the time to research on the Manage My Life website and have cam across similar information towards your issue. While you are waiting for a detailed reply from an expert I have attached the links below. Hope this helps!

Read More
Priscilla V -
March 19, 2012
A:

Thank you for your question. I'm sorry you are having this problem with the icemaker. If the arm is raised and the icemaker is still making this sound, the only way to stop it will be to, lower the icemaker (see image) and disconnect the wire harness. This will allow you to remove the icemaker. The replacement icemaker is # WR30X10093 and is available at http://www.searspartsdirect.com/partsdirect/part-number/WR30X10093?searchModPar=WR30X10093&pathTaken=partSearch&prst=0&shdPart=&sid=MMLxexpertxmerch . I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
March 20, 2012
See more answers

Top Parts