Model #WNSE6280B1WW GE Residential Washers

  • Controls & Backsplash
    3 Results
  • Cabinet, Cover & Front Panel
    3 Results
  • Tub, Basket & Agitator
    3 Results
  • Suspension, Pump & Drive Components
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washing machine WNSE6280B1WW

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
I am sorry to hear of the issue you are having with the washer, I know how frustrating it is to have it down.
Hearing the motor spinning is a good sign, I suspect your issue is with the drive belt. It may have stretched some and come off the pulley or it could have broken.
The only way to know for sure is to open the unit up and take a look at the best going around the two pulleys. Sometimes you will find the belt sitting on the bottom of the cabinet where it's fallen off, or sometimes it's broken. 
If you end up needing a replacement drive belt for the unit, I have provided a blue link below that you may click on to be directed to the SearsParts site to view and purchase the needed belt. 

Drive Belt for GE Washer WNSE6280B1WW

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-349-5071, or click here to be directed to the page to set up service.
Hope this helps and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
April 23, 2014
A:

Thanks for your quick response! I checked the belt and pulleys. The belt looks fine and the pulleys turn. Do you have any other suggestions?

Read More
Paul -
April 27, 2014
A:

Thanks for the response. I was hoping it would be an easy fix with the belt. When you mention the motor is "running?," does it sound like it's actually running or just humming? You may have to open it up again and check operation to see if the motor is just humming versus running. If a motor siezes up, it will hum and not actually move. That could be the issue. If the motor does indeed run when powered on, the only other part that could cause the issue would be the transmission/gearcase. You will not see any physical signs of the failure; the failure will be inside the gearcase so it will not be evident.

Read More
Jeff Wallace Sr -
Sears Technician
April 28, 2014
See more answers

Top Parts