Model #WLTL21430 WESLO Treadmill

  • Walking Belt/motor/console/hood
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing a walking belt WLTL21430 Weslo Weslo cadence ds10

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
August 04, 2013
A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when needing to replace your walking belt on your Treadmill. I did do research and I have located instructions on how to replace the walking belt on your Weslo Treadmill. Click here for the instructions. If you need to order the walking belt you can always visit searspartsdirect.com.

 

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
August 05, 2013
A:

My Weslo cadence DS10 doesnt have an adjustment bolt for the front roller. It is just held in place directly into the frame. So the link you suggested doesnt help. I am beginning to believe there is no way the walking belt can be replaced. So why should i buy a replacement belt for this model from sears? Does anyone have an answer please.

Read More
Ranilo -
August 11, 2013
A:

there has to be a way to remove the front roller, are there any bolts in from the sides or not. some rollers just set in the frame and after the tension is relieved from the walking belt and the rear roller is removed the front will just come out.

Read More
TC -
August 11, 2013
A:

Just the roller's metal ends into holes of metal frames. The frame on each side are soldered to the horizontal bar on which the motor is bolted. I dont see how both walking belt and motor belts can be removed/replaced. If you look at the diagram of parts in sears.com for this model you would see what I mean? I agree with you there must be a way. But unless someone show me (and I am a good problem-solver) That these parts can be replaced dont bother buying the replacement belts for this model. :(

Read More
Ranilo -
August 11, 2013
A:

wow, taking a look at that diagram never seen one like that. is there any bolts that hold the front frame section to the rails that the roller is in. or are they welded. if there is bolts there taking the bolts out of one side would let you push that frame rail out enough to remove the front roller. there has to be a way to remove that front roller.

Read More
TC -
August 11, 2013
A:

Side frames are welded. I was hoping the ends of the roller has a spring action but there is none. I took everything apart. The frame and front roller just won't. Unbelievable!

Read More
Ranilo -
August 11, 2013
A:

is there any type of clip or spacer that would come off the roller so the roller then could be pushed to one side or the other and give the other end enough room to be removed from the frame. it would be on the small part of the roller that is inserted in the frame. they list the roller and drive belt along with the walking belt for replacing so there has to be a way I just never had one of these apart before but just about every other model and brand I've had apart

Read More
TC -
August 11, 2013
A:

Just figured it out. Just have to widen the frame by force and the roller will come loose. Duh. Silly cheap design made me look stupid. Lol

Read More
Ranilo -
August 11, 2013
A:

great, but so you don't think your stupid this is your first treadmill. I have hundreds under my belt and did not know. was just thinking of all possibilities. it's amazing that with all the treadmills I have done never had your model. and that's the first one I ever heard of that you had to just widen the frame rails by force to get the front roller out. there was a way LOL

Read More
TC -
August 11, 2013
See more answers

Top Parts