Model #WLTL19321 WESLO Treadmill

  • Treadmill
    3 Results
Find part by diagram >

Question and Answers

Q:

While walking on treadmill it stops WLTL19321 Weslo Cadence c22

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the treadmill stopping.
 
Glad to help out.   Im  looking at your Weslo Cadence Treadmill model number WLTL19321.

Several things can cause the belt to slow down when you  walk on it. The motor controller or the motor can cause this problem. To test the motor and controller someone needs to read the motor output at A+ and A- on the motor controller with the treadmill running. This will be between 10-80 VDC. Then let someone step on the belt and walk and see if the voltage increases to compensate for the load. Usually the voltage will increase 5-10 VDC. If the voltage increases the controller is doing its job and the motor is weak. 

The most common cause of the belt slowing down is a dry or worn out belt and or board. Lift the edges of the belt and look at the walking board and feel of the belt and board. They should be smooth and slick. If the walking belt and board don't seem worn, you should lubricate the belt and board with part number 219168 belt lubricant. The procedure for lubricating the belt is: 

Turn the belt by walking on it without the motor running until the belt seam is just past the front roller. Lift the belt and put 1/2 the tube onto the walking board in a zigzag pattern. Move the belt until the belt seam is just in front of the rear roller and put the rest of the lubricant on the walking board. 

Start the treadmill and walk on all sections of the belt for 10 minutes. This should distribute the lubricant evenly. 

Use only this special belt lubricant on the walking board and belt. Regular silicone spray or other lubricants might gum up the wax on the belt and you will have to replace it.

walking belt lubricant

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
April 25, 2014
Q:

While walking on treadmill it stops WLTL19321 Weslo Cadence c22

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the treadmill stopping.
 
Glad to help out.   Im  looking at your Weslo Cadence Treadmill model number WLTL19321.

Several things can cause the belt to slow down when you  walk on it. The motor controller or the motor can cause this problem. To test the motor and controller someone needs to read the motor output at A+ and A- on the motor controller with the treadmill running. This will be between 10-80 VDC. Then let someone step on the belt and walk and see if the voltage increases to compensate for the load. Usually the voltage will increase 5-10 VDC. If the voltage increases the controller is doing its job and the motor is weak. 

The most common cause of the belt slowing down is a dry or worn out belt and or board. Lift the edges of the belt and look at the walking board and feel of the belt and board. They should be smooth and slick. If the walking belt and board don't seem worn, you should lubricate the belt and board with part number 219168 belt lubricant. The procedure for lubricating the belt is: 

Turn the belt by walking on it without the motor running until the belt seam is just past the front roller. Lift the belt and put 1/2 the tube onto the walking board in a zigzag pattern. Move the belt until the belt seam is just in front of the rear roller and put the rest of the lubricant on the walking board. 

Start the treadmill and walk on all sections of the belt for 10 minutes. This should distribute the lubricant evenly. 

Use only this special belt lubricant on the walking board and belt. Regular silicone spray or other lubricants might gum up the wax on the belt and you will have to replace it.

walking belt lubricant

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
April 25, 2014
Q:

While walking on treadmill it stops WLTL19321 Weslo Cadence c22

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the treadmill stopping.
 
Glad to help out.   Im  looking at your Weslo Cadence Treadmill model number WLTL19321.

Several things can cause the belt to slow down when you walk on it. The motor controller or the motor can cause this problem. To test the motor and controller someone needs to read the motor output at A+ and A- on the motor controller with the treadmill running. This will be between 10-80 VDC. Then let someone step on the belt and walk and see if the voltage increases to compensate for the load. Usually the voltage will increase 5-10 VDC. If the voltage increases the controller is doing its job and the motor is weak.

The most common cause of the belt slowing down is a dry or worn out belt and or board. Lift the edges of the belt and look at the walking board and feel of the belt and board. They should be smooth and slick. If the walking belt and board don't seem worn, you should lubricate the belt and board with part number 219168 belt lubricant. The procedure for lubricating the belt is:

Turn the belt by walking on it without the motor running until the belt seam is just past the front roller. Lift the belt and put 1/2 the tube onto the walking board in a zigzag pattern. Move the belt until the belt seam is just in front of the rear roller and put the rest of the lubricant on the walking board.

Start the treadmill and walk on all sections of the belt for 10 minutes. This should distribute the lubricant evenly.

Use only this special belt lubricant on the walking board and belt. Regular silicone spray or other lubricants might gum up the wax on the belt and you will have to replace it.

walking belt lubricant

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
April 25, 2014

Top Parts