Model #WGD9400SW0 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8576353 Burner Assembly
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whirlpool Duet Dryer Model WGD9400SW0 Error Code F01 WGD9400SW0 Whirlpool Residential dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer displays an error code.

The F01 is a primary control  failure. It is recommended to replace the control board with this error code. 

ACCESSING & REMOVING THE ELECTRONIC
ASSEMBLIES
There are three electronic assemblies: the Machine Control Electronics, the
UI Power Cube, and the Console Electronics and Housing. See figure 15.
1. Unplug dryer or disconnect power.
2. Remove the three rear screws from the top panel, and slide the top
panel to the rear to remove.
Machine Control Electronics
1. Perform preceding steps 1 and 2, then remove the two screws that hold
the machine control electronics bracket in place.
2. Slide the bracket over the top of the drum to
access the machine control electronics connectors
and mounting screw. 
3. Remove all the wire connections to the machine
control electronics. 
4. Remove the screw holding the machine control
electronics assembly to the mounting bracket. See
figure 16.
5. There are two plastic legs on the front of the
machine control electronics that slide under the
mounting bracket.
? There is one plastic leg on the rear of the
machine control electronics that slides under the
mounting bracket.
? There is a locking tab on the bottom of the
machine control electronics that snaps into the
mounting bracket.
Press the locking tab on the bottom of the machine
control electronics and slide the assembly to the
front, then lift.
UI Power Cube
1. Perform steps 1 and 2 in Accessing and
Removing the Electronic Assemblies, page 13.
2. Remove all wire connections to the UI power
cube. 
3. Remove the screw holding the UI power cube to
the mounting bracket. 
UI Power Cube and Machine Control Electronics. 
Remove machinecontrol electronics from mounting bracket.
4. There are two plastic legs on the front of the
UI power cube that slide under the mounting bracket. Slide cube out and remove.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
January 05, 2015
Q:

Whirlpool Duet Dryer

A:

Thank you for choosing ManageMyLife.com. I understand how important it is to have the manual for your dryer for optimum use. I have included a link to our ManageMyLife page where you can view the manual you need. Just click the blue link below to be taken to the page.
Owners Manual for Whirlpool Dryer Model # WGD9400SW0
If you would like more assistance, reply to this thread  and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 01, 2013
Q:

Owners Manual Whirlpool Duet Dryer

A:

Thank you for choosing ManageMyLife.com. I understand how important it is to have the manual for your dryer for optimum use. I have included a link to our ManageMyLife page where you can view the manual you need. Just click the blue link below to be taken to the page.
Owners Manual for Whirlpool Dryer Model # WGD9400SW0
If you would like more assistance, reply to this thread  and I will be glad to assist you further. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
September 01, 2013

Top Parts