Model #WFW9500TW01 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Whirlpool Duet Door Reversal Kit WFW9500TW01

Q:

I have whirlpool duet front load washer, model # WFW9500TW01. Giving SUDS and F35 codes. How do I fix problem? WFW9500TW01 Whirlpool Residential washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching modelWFW9500TW01; the “sud” error code indicates that suds are detected by the pressure switch. This can happen if too much detergent is used, to fix this problem run through a “rinse/spin” cycle. Run a normal cycle without adding any detergent this should clear the excess detergent. Also make sure that the drain hose is not plugged or kinked, check the drain pump make sure that it is not clogged. The “F35” error code indicates that there is a malfunction of the steamer component detected by the steamer control board. Check the pressure hose make sure its fixed correctly, make sure the air trap is not blocked, make sure all of the hoses are not blocked.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
June 04, 2015
A:

We have tried all your suggestions; all unsuccessful . We understand the problem may be in the washer electronic control board. We saw where you show videos on installing this part but on an older machine. Can you assist us in installing this part and do you have a video demonstrating this also?

Read More
Larry -
June 04, 2015
A:

I googled it and there is a fix on youtube it says its a diode isdue and how to replace it, involves some soldering.

Read More
RANDY -
June 17, 2015
See more answers
Q:

My whirlpool WFW 9500TW01has Sid and f35 codes how do I fix this? Whirlpool Residential washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when having trouble with the washer.
 
Glad to help out.   Im  looking at your Whirlpool Washer model number  WFW 9500TW01.

Here is what the technical book says on your washer model with the F35.

PRESSURE SENSOR FAILURE:

If this failure is displayed, there is any malfunction of the steamer component detected by the Steamer Electronic Board.

POSSIBLE CAUSES/PROCEDURES:

1.  Check if pressure hose is fixed correctly.

2.  Check if the airtrap in not blocked.

3.  Check if the hose is not blocked.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 

Read More
Larry L -
Sears Technician
April 21, 2014

Top Parts