Model #WFW9400SW02 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Pump And Motor Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to stack a whirlpool washer and dryer WFW9400sw02

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching modelWFW9400sw02; I have posted a link of the stacking kit that would be needed to stack your washer and dryer. To view the link click here.

I trust this information will help you, have a great day.  

Read More
CarlosZ -
Sears Technician
February 22, 2015
Q:

I�??ve Kenmore HE2 11046462501 washer. It stopped in middle of cycle. Tried to restart it and stuck at add garment cycle. Water did not fill in at all. I tried to WFW9400SW02 Whirlpool Residential ...

A:

 Hello again thanks for reposting the question about your washer. As before I will express the importance of handling the new controls, and preventing electrostatic discharge that damages electronic controls wiring and related components. Based on your description I suspect that there is a wiring harness issue, damaged MCU, or bad central control.
There are no safety switches on the side panels or top, however the front does contain the door switch so it must be in place for proper operation.
Although you have started this repair I strongly recommend calling an experienced technician to come diagnose and complete any added repairs.

Thanks
Ron H. 

Read More
Ron H -
Sears Technician
July 15, 2014
Q:

Control panel install for a whirlpool duet washer

A:

Thank you for choosing ManageMyLife.com. I understand how important it is to be able to replace a control board for your washer. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
Electronic Control for Whirlpool Washer Model # WFW9400SZ02
I have also included a link to our ManageMyLife page where you can view a similar question to reference the images you need. Just click the blue link below to be taken to the page.
Can I get a wire diagram for washer model WFW9400sw02?
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
October 09, 2013

Top Parts