Model #WFG114SVQ0 WHIRLPOOL Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Backguard Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Oven & Broiler Parts
    3 Results
  • Door Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Help WFG114SVQ0 Whirlpool Gas range

A:

Thank you for the inquiry and for using SearsPartsDirect.com. I am sorry to hear that the oven is no longer heating, I know how frustrating that is.

Since the oven is operated off one ignitor, it is possible the ignitor is faulty and needs replacement. Can you tell if it is glowing when you turn on the oven heat? There is also the possibility that the electronic control board is not providing power to the ignitor and may have a shorted relay. Those are the two most likely issues you are experiencing with the unit.

The surface burners have their own ignitors and have a separate relay within the control board, so it is absolutely possible to have the surface units working and the oven cavity out.  

If you have a multimeter and would be comfortable testing the components, you can identify which is at fault. If you haven't tested range parts in the past it may be best to have a technician assist with the troubleshooting/repair. If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, click here to be directed to the page to set up service. 

If you have any further questions, please feel free to ask. Thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
September 26, 2013
Q:

Whirlpool f5 error

A:

I understand that your Whirlpool is displaying the error code F5. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
March 29, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. I reviewed the technicial information for your range and there isn't an F5 error code. However, there is an F3 error code. This error code indicates an issue with the oven sensor temperature probe (W10181986) or with the main control board (W10108320). If you have an ohms/volt meter you can test the temperature probe for the proper continuity (image one). First remove all power to the range and then open the oven door. You will see mounting screws on the inside of the oven cavity that mount the oven temperature sensor probe inside the oven (image two). If you do not see mounting screws inside the oven for that component, then you will need to move the range out and remove the back panel of the range (image three). You can then remove the oven temperature sensor probe from the back side of the oven cavity for testing. If the temperature probe test good, then replace the main control board. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
March 29, 2013
A:

Tykara, thanks for the info but my stove has "F5" flashing on the clock and control panel and the oven won't lite. The model is a WFG114SVQ0, 2010 with Serial #VEY0307357. I will check what you say above but it doesn't have F3 but rather F5 showing. I cannot find anyone that seems to know what F5 indicates. Is that bogus or what????

Read More
jerry -
March 29, 2013
A:

Jerry, I recommend replacing the control board if nothing is displaying. The F5 doesn't exist for your unit and it may be the control board glitching.

Read More
Tykara -
Sears Technician
March 29, 2013
A:

How does it beep 5 times and show F5 if that isn't for my unit??? The unit I have has no door latch as it is not self cleaning---no door latch!!! Unit is only less than 2 years old and Whirlpool acts like it isn't their manufacturer problem. Talking with lots of people, the f5 on these units is rampant problem. Do you have any other ideas?????

Read More
jerry -
March 29, 2013
A:

Jerry, I've provided all the information that I can. You're oven does not have the F5 error code listed. When the control board throughs error codes that do not apply to the unit, it points to the control board failing. In general the F5 error code for different brands means the following: door lock assembly, control board, or oven sensor tempeature probe. The only other thing you could check is the teamperature probe but it doesn't apply to your unit. To test the sensor probe, you'll need a multimeter to do so. If the F5 error code is a known issue with Whirlpool, then you can call their recall team, with your model and serial number to see if your unit qualifies. You also have the option of scheduling for service to have unit checked to verify the part or just order the part and replace it yourself. Jerry, I apologize I don't have another solutions for you to get this issue resolved. Please let me know if I can provide anymore information.

Read More
Tykara -
Sears Technician
March 30, 2013
See more answers
Q:

The Electronic Oven Control will freeze up during use and the buttons don't work. When it freezes up it cannot be shut off.

A:

I'm sorry to hear that you are having some difficulties with your Freezer. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Dezeray S -
October 11, 2011
A:

You can often reset that electronic clock control board by shutting off the circuit breaker when it freezes up as you are describing. Your details seem to indicate that you have a relay on that control board that is sticking and causing the oven to overheat. You will probably need to replace that electronic control board to permanently fix this problem. You should monitor the oven very closely and if that control keeps freezing up so that the range overheats, I recommend that you change that control board to prevent damage to the range (and a dangerous situation). You can order that control board from the Sears PartsDirect website. Use the full model number of your range to access the parts list diagram and order parts. NOTE: Your details indicate that the model number WGF114SVQ0. That is not a valid model number. I suspect that your model number is WFG114SVQ0 (2nd and 3rd letters are switched). Unplug the range to disconnect electrical power before accessing and replacing that control board. You should be able to access it by removing the back panel of the console.

This information should help you fix that range problem. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
October 12, 2011
See more answers

Top Parts