Model #WED9500TW2 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Error Codes WED9500TW2 Whirlpool Residential dryer

Q:

We ordered and installed kit W10294831 per error code F01 receiving when trying to run Whirlpool Dryer. After installation. Same error occurs; F01.????

A:

Receiving the same error code after replacing the part can be very concerning. I did some research on the part number but was not able to find a solution. Your expert will help answer your question. To better help your expert, I would like to suggest adding the full model number of the dryer. It may take two business days for your expert to respond. I do hope that everything works out.

Read More
Marc -
January 14, 2013
A:

TWO DAYS??? I hope not. Thanks. Model number: WED9500TW2

Read More
Jen Light -
January 14, 2013
A:

Hi,

Thank you for asking this question and allow me to answer it this way.

The board shows the f01 and it was just replaced for the same fault, check the power into the board as outlined on the image below. If there is 120 volts showing and the display is operational there could be a problem with static discharge. All control board are sometimes affected by it and I would recommend a new board if the 120 volts AC are present the lowest volts is 108 VAC.

I hope this answer is useful and that it helps you correct the problem with your appliance.
Thank you for using ManageMyLife.

Read More
Bill__W -
Sears Technician
January 15, 2013
See more answers

Top Parts