Model #WED9400SW0 WHIRLPOOL Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

mi secadora modelo wed9400sw0 rechina WED9400SW0 Whirlpool Residential dryer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
January 14, 2014
Q:

My dryer squeaks to be working that could be happening? WED9400SW0 Whirlpool Residential dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the dryer.

Glad to help out.   Im  looking at your Whirlpool model number wed9400sw0.
 
 In helping with your dryer.  The first thing to let everyone know is that they must first check there lint screen.  Pull it out and make sure the vent the screen goes into is not plugged.   Next check the vent area where it goes outside the house.   A dryer has to have a free movement of air to prevent heating problems and fire hazzards.

 
When it comes to making a grinding noise there are a few items to look at.   Most likely it is either the front or rear seal for the tub.   When they go bad will make the grinding noise because of the breakage of seals.  The seal is the same in the front as well as the back.  The next item is the Rollers that are what the tub turns on.  They are wheels with a rubber coating and keeps things quiet till they go bad too.
 
Those are the items that I would look at.  
 
 
 
 
 If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 
 

Read More
Larry L -
Sears Technician
December 06, 2013
Q:

Move dryer vent

A:

Thanks for the inquiry about your dryer model WED9400SW0, I will be glad to assist you.  Your dryer can only be vented from the sides or the bottom; there is no access to vent out the back. I hope this helps you, if you need more help reply with details and I will be glad to respond. Here is a link to Sears Home Services should you need service. Ron H.

Read More
Ron H -
Sears Technician
November 19, 2013
A:

Hello Jennifer, I have review the previous answer and found that I was mistaken about your dryer venting. You dryer can be vented from the back and most likely was vented from the back when it was new. You can get the venting parts at Sears Parts Direct. The space needed at the back is just enough space that the vent can hook up without any kinks in the vent tubing or venting line. Normally about 5 inches is enough. Sorry for the confusion on previous text. Ron H.

Read More
Ron H -
Sears Technician
November 20, 2013
A:

Thank you. I have a 36" deep space for this dryer. I don't have the exact front to back dimensions for the dryer. Can you tell me if I have enough room to vent it through the back?

Read More
Jennifer -
November 20, 2013
A:

Hi Jennifer, you will need to measure the space; your dryer is 31 1/2 inches deep with door closed. You need a minimum of 5 inches to install venting with an elbow (if used). Here is a link to the owner's manual see page 6 for installation instructions.(Available to download.) manual Ron H.

Read More
Ron H -
Sears Technician
November 21, 2013
See more answers

Top Parts