Model #WDSR2120J5WW GE Residential Washers

  • Controls & Backsplash
    3 Results
  • Cabinet, Cover & Front Panel
    3 Results
  • Tub, Basket & Agitator
    3 Results
  • Suspension, Pump & Drive Components
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer will not squeezes

A:

The Managemylife web site is a good resource to find out what may be happening with your Pressure Washer. I did some research for you at Managemylife.com and found an excellent article that also has multiple expert answers at the bottom of the web page that addresses the most common questions that have been asked by other members. I hope this will help until your expert can answer your specific question. I attached the link below.

Read More
Alina F. -
March 09, 2012
A:

I believe you are referring to the washer is not "spinning" when you complain the washer is not "squeezes." If the washer will agitate but will not spin then The lid switch might be at fault. Please reply with more detail about the squeezes problem for further assistance.

Read More
Fred M -
Sears Technician
March 11, 2012
See more answers
Q:

wdsr2120j5ww dimensions-specs -- why does it make a racket on spin?

A:

I know how concerning it is when your washer makes unusual noises. I researched your question and found a couple links that include informaiton on a noisy washer. I attached both links below. I hope this helps.

Read More
Jackie S -
February 27, 2012
A:

Thanks for contacting ManageMyLife.com. The was specs show as 27 inches wide, 42 inches high, 25 1/2 inches deep. Loud noises during the spin cycle can be caused by two issues. The first is if the tub is out of balance. Make sure your loads are balanced as well as the tub. Sometimes you may have to move the tub around to get it just right. If that doesn't work there's most likely an issue with the transmission and break assembly part # WH38X10002.

To view or order parts please visit SearsPartsDirect.com with the model number.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
February 27, 2012
See more answers
Q:

Why are my clothes still soaking wet at the end of the wash cycle?

A:

You really don't understand the convenience of your washer until it isn't working properly. I'm sorry your having issues with your appliance this morning. Below I attached couple links that will further explain your issue. I hope these links are helpful!

Read More
Jackie S -
July 10, 2011
A:

Hello,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your washer.

The diagnosis of this issue will require the use of an ohm/volt meter and you will have to perform ohm checks and/or live voltage checks. If you have an ohm/volt meter and are confident in your technical abilities, please reply below and I will be happy to give you the checks.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 11, 2011
See more answers

Top Parts