Model #WD-62530 MITSUBISHI LCD Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers


Night scenes not visible WD62530 Mitsubishi Lcd projection television


Thank you for being Sears’ valued member and for contacting with your question about your Mitsubishi LCD television. I am so sorry the picture is getting dark and difficult to see. I know the TV is a key part of our daily lives and know you want to get it fixed quickly. In this case, I recommend you have the TV repaired by a qualified technician.

We do not give repair advice on televisions because internal components in the TV can retain a dangerously high electrical charge, even when the TV is disconnected from the power supply. Here at we love to help you with your home repairs but in this case, for your safety, we recommend you have the TV serviced. To set up service go or call 1-800-469-4663 (1-800-4MY-HOME). 

Thank you for your understanding in this matter. I hope we can help you with any future repairs. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
November 19, 2014

lamp has been replaced on model wd-62530.lamp light still blinking and no power.


I can understand your frustration over your television malfunctioning, even after already replacing a part. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
June 14, 2013

Working on a TV can be difficult and dangerous due to the high voltage circuits inside. Always remember to unplug any TV before trying to service it and if unsure of the proper procedures, seek the service of a trained professional. 


Hello Stephen,


I'm sorry to hear that your television is malfunctioning after the new lamp replacement and I would like to assist you.  The issue that you have described may be caused by several different things.  I would like to know the part number of the lamp that was used as a replacement, please reply with this part number.  If it is the correct part number, I suggest removing the replacement lamp and then re-installing it, making certain that it is fully seated into the housing.  Once correct insertion and contact is verified, this may me attributed to an issue with the ballast and will require an experienced television technician to diagnose and repair it.  The voltages that are developed on the ballast are very dangerous and potentially deadly, do not work on or around it yourself.  Contact a local television repair service or follow this link: Sears Home Services, to arrange a repair appointment with a Sears Technician.


Please let me know if you would like any further assistance.


Jerry C 

Read More
Jerry C -
Sears Technician
June 18, 2013
See more answers

Top Accessories