Model #WD-52525 MITSUBISHI DLP Television

  • Cabinet Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

dust filter WD-52525 Mitsubishi Dlp

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 
The dust filter part number for your model of Mitsubishi is 620D144010, however, it looks like the part is not available through Sears at this time. Mitsubishi may have discontinued the part.
We would recommend running an online search for the part number or contact Mitsubishi to inquire on its availability.
Hopefully this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
February 11, 2014
Q:

DLP lamp will not turn on.

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your TV not working properly. We are here to help. The ballast, optical engine, fan and heat sensor can stop the lamp from lighting. The blinking light diagnostics ( first image below) is the only safe way to determine which part is bad. The second and third image shows how to replace the ballast and optical engine. However, unless you had training in electronics, I recommend scheduling service. This way the TV will be fixed properly without additional problems. I hope this helps.

If you do not feel comfortable repairing this problem yourself or if it is under warranty, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and follow the instructions, then click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
September 24, 2013
Q:

Why won’t my Mitsubishi HDTV come on?

A:

I am unfamiliar with your model. The Mitsubishi models usually start with two letters followed by the screen size in inches and a few more numbers to show the series (i.e. WD-52525, LT-52246). You mentioned that someone suggested the "lamp would lead me to believe you have a "WD" model, the micro display projection sets. I recommend unplugging the set, waiting a while then plugging it back in. If there was a glitch that locked up your set, this could wash it out. It is difficult to give you an idea of what could cause a noise like this without knowing the set. A small component vibrating at a frequency can cause a squeal, as well a color wheel that is vibrating (this would be more common) in a DLP set. A technician can get an error code from your set to give him an idea of where to start looking. I wouldn't want to suggest service if all you need is a lamp but it is not sounding like it with what you've already said. I would go with a repairman because of the high pitch noise.

Read More
David A. - Personal Solutions Manager -
Sears Technician
August 05, 2009

Top Accessories