Model #WBVH6240F0WW GE Residential Washers

  • Controls & Dispenser
    3 Results
  • Cabinet, Cover & Top Panel
    3 Results
  • Front Panel & Door
    3 Results
  • Tub & Motor
    3 Results
  • Pedestal
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Water Pump control? WBVH6240F0WW Ge Washer

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching modelWBVH6240F0WW; since you have already checked the pump and it appears to be ok, it sounds like you may need to replace the electronic control board. The control board governs the functions of the washer including the drain cycles. I have posted a link below of the control board.

 

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
January 08, 2015
Q:

My GE front load washer is in some kind of diagnostics mode and I cant clear it? WBVH6240F0WW Ge Washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the washer.
 
Glad to help out.   Im  looking at your GE Washer model number WBVH6240F0WW.

says to enter a service mode:  Press SIGNAL-DELAY-SIGNAL-DELAY (within 30 seconds of plugging in washer).

To EXIT:  repeat  SIGNAL-DELAY-SIGNAL-DELAY.

I hope that helps.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 19, 2014
A:

I did signal delay signal delay and that doesnt seem to do anything. Any other ideas?

Read More
Suzie -
May 19, 2014
See more answers
Q:

how do you install drive belt on ge front load washer model number wbvh6240f0ww

A:

Replacing a belt on a washer could be difficult without the proper instructions. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
November 29, 2012
A:

Hi,

Thank you for your question and for letting me assist you with your repair.

The trick is to install the belt on the motor pulley first and start it on the basket pulley and using the leverage of the larger pulley, turn the pulley and roll the belt onto the pulley. Be careful of your fingers in relation to the belt and pulley.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
November 30, 2012
See more answers

Top Parts