Model #VS-45607 MITSUBISHI Projection/Digital 42" and above TV

  • Ptv
    3 Results
Find part by diagram >

Question and Answers

Q:

Power button

A:

When an appliance doesn't work properly or gives out it can be very disappointing because you don't really know what is wrong with it or you might even have to buy a whole different appliance. A suggestion I have for you while you are waiting on your response from an expert is visiting the SearsHomeServices.com website to set services with Sears team. I have attached the link below if you are interested in viewing while waiting on your response from an expert. Hope this helps, good luck

Read More
Dezeray S -
August 30, 2010
A:

It sounds like your TV is going into protect mode. When you first apply AC, the power led will blink red 3 times to let you know the microprocessor has booted. After then, when you hit the power button, the power led will turn green. If a protect is activated the TV will store an error code and shutdown. Retrieving the error code is only useful for someone who is going to go in and check the circuit it indicates for problems. Since your problem came after moving, it seems like a good enough reason to have someone check the TV out internally to see if a harness came loose. If they do not find anything they can then use the error code to start looking for a failure.

Read More
David A. - Personal Solutions Manager -
Sears Technician
September 09, 2010
See more answers

Top Accessories