Model #UCVM36FS-01 THERMADOR Vent Systems (Downdraft)

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers


After cleaning the filters, the reset light on the UCVM36FS will not go out, but the blower still works. How do I get the reset light to go off. UCVM36FS-01 Thermador Downdraft


Thank You for choosing Sears Glad to help out. Im looking at your model number UCVM36FS-01 and the efficiency of the downdraft ventilation system depends on the cleanliness of the intake and filters. The frequency of cleaning depends on the amount and type of cooking.
[] Do not use the ventilating system without the filters in place or with grease-laden filters or
To Remove Filters
1. Pull out on lever.
2. Lift filter up and out.
3. Clean filters in the dishwasher or in
warm, sudsy water. See Care and
Cleaning Chart, next page, for further
To Replace Filters
1. Place bottom of filter in grease trough.
2. Pull out on lever.
3. Press top of filter into place.
4. Release Lever.
To Clean the Intake and Grease
Intake must be in the raised position to
1. Turn off the blower.
2. Remove filters.
3. Clean intake and grease troughs with
general household degreaser spray or
4. Rinse and dry.
5. Replace filters

I was not able to find any information on a light or indicator light for the filters. Theres not a timer that will light after a period of time. It is possible that the filters have a switch that would indicate to you that the filter is not in place correctly. I have included a link for the owners manual as well. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
Thank you for choosing Sears

Read More
Sherman_G_Wallace -
Sears Technician
May 13, 2014